Studio Steel
General terms
The terms for your quotation, order, payment and installation with Studio Steel BV.
Download the Dutch terms (PDF)This translation is based on the Dutch terms.
1. Acceptance of the quotation
Both parties declare their agreement with the contents of the quotation and these general terms and conditions of sale.
Upon acceptance, the quotation must be approved online or returned signed by email to STUDIO STEEL BV.
The approved quotation, any technical drawings and these general terms together constitute the agreement between STUDIO STEEL BV and the customer.
2. Measurement and ordering
After approval of the quotation and receipt of the agreed deposit, an appointment for technical measurement is arranged in consultation with the customer.
The final price is determined after technical measurement and/or a site visit. Changes, technical requirements, discrepancies or additional requests may result in an adjusted price or quotation.
Measurement by STUDIO STEEL BV
Where STUDIO STEEL BV takes the measurements, the measurement record and/or technical drawing prepared by STUDIO STEEL BV is binding for production and installation.
If, after technical measurement, the customer alters or arranges alterations to floors, walls, partitions, ceilings, door openings, plasterwork, flooring or other elements that may affect dimensions or installation, STUDIO STEEL BV is not responsible if the ordered products consequently no longer fit or cannot be installed correctly.
In that case, the full order remains payable. Any new measurements, adjustments, production changes, repairs or additional installation work will be charged separately.
Measurement by the customer
Where the customer takes the measurements, they are fully responsible for the accuracy and completeness of the dimensions and technical information supplied.
The technical drawing prepared by STUDIO STEEL BV on the basis of this information and approved by the customer is the governing and binding document for production.
The customer is responsible for checking, among other things, dimensions, opening direction, configuration, quantities and other technical information before final approval.
Errors or discrepancies arising from incorrect or incomplete information or measurements provided by the customer cannot be attributed to STUDIO STEEL BV.
Where the customer undertakes both measurement and installation, the order must be paid in full before production begins.
3. Payment terms
Unless otherwise agreed in writing, payment is made as follows:
• a 50% deposit, including VAT, when ordering;
• the remaining 50%, including VAT, before the scheduled installation.
Technical measurement is scheduled only after STUDIO STEEL BV has received the agreed deposit in full.
The full balance must be paid within the payment period stated on the invoice and, in all cases, before the scheduled installation.
Late payment before installation
If the outstanding balance has not been received on time, STUDIO STEEL BV reserves the right to remove the scheduled installation from the planning without further formal notice.
The customer will then be rescheduled for the next available opportunity after full payment has been received.
If a scheduled installation must be removed from the planning because of late or missing payment by the customer, a fixed charge of €550 will be made to cover the resulting planning, organisational and installation costs, insofar as permitted by law.
In the event of late payment, applicable default interest and compensation are payable in accordance with current Belgian legislation.
4. Delivery and installation
Delivery and installation are provided on the ground floor as standard, unless otherwise agreed in writing.
If a furniture lift or another special provision is necessary, an additional charge may apply. Unless otherwise agreed, a furniture lift is charged at a fixed rate of €150 per door.
Permits and costs for parking restrictions, occupation of public space, access permits or other necessary arrangements are always borne by the commissioning party/customer.
At the agreed time, the site must be safe, dry, sufficiently finished, freely accessible and suitable for installation.
If installation cannot be carried out, or cannot be carried out properly, due to circumstances not attributable to STUDIO STEEL BV, additional travel, waiting, labour and installation costs may be charged to the customer.
5. Suitability and strength of walls, floors and ceilings
STUDIO STEEL BV is not responsible for the strength, stability, load-bearing capacity, composition or suitability of existing walls, partitions, ceilings, floors or other structures onto or into which the ordered products are to be fixed.
The customer/commissioning party ensures that these structures are sufficiently strong and technically suitable for the planned installation.
If, during installation, additional reinforcement, construction work or other alterations prove necessary to enable safe and correct installation, these are treated as additional work and charged separately.
A lack of strength or suitability of the existing structure cannot be regarded as a manufacturing or installation defect on the part of STUDIO STEEL BV.
6. Drilling, pipes and concealed services
By confirming the installation assignment, the customer expressly authorises STUDIO STEEL BV to install the ordered products at the agreed location and to carry out the necessary drilling, anchoring and fixing in floors, walls, partitions and/or ceilings.
The customer is responsible for correctly informing STUDIO STEEL BV in advance of the presence and exact location of, among other things:
• electrical conduits and cables;
• water and gas pipes;
• underfloor heating;
• drainage pipes;
• ventilation ducts;
• data cabling;
• other concealed technical installations or services.
If such services are not visible and their presence or exact location has not been communicated to STUDIO STEEL BV in writing beforehand, STUDIO STEEL BV cannot be held liable for damage arising from normal and necessary drilling or fixing work, unless mandatory legal provisions provide otherwise.
7. Liability and consequential work
STUDIO STEEL BV cannot be held liable for normal and unavoidable damage or consequential work affecting, among other things, plasterwork, rendering, paintwork, floor finishes, skirting boards or other finishes inherent in the agreed installation, removal or fixing work, except where a demonstrable fault by STUDIO STEEL BV is established.
Painting, plastering, rendering and other finishing or repair work after installation are not included unless expressly specified in the quotation.
8. VAT rate
The reduced VAT rate of 6% may be applied if all legal requirements are met.
The customer is responsible for supplying all required information, declarations and supporting documents correctly and on time.
If it subsequently appears that the reduced rate was incorrectly applied because of incorrect or incomplete information from the customer, the difference may be charged to the customer insofar as permitted by law.
9. Additional work and changes
Only the work, products and services expressly stated in the quotation are included in the agreed price.
Unless otherwise agreed, additional or unforeseen work is carried out at €75 per person per hour, excluding materials and any additional costs.
Changes requested after confirmation of the order may result in additional costs and an extension of the production, delivery and/or installation period.
10. Validity of the quotation
Each quotation is valid until the end date stated in it. After that date it expires automatically, unless otherwise agreed in writing.
11. Cancellation
If the customer cancels after confirmation of the order, fixed compensation of 30% of the total quotation price may be payable, insofar as this complies with applicable legislation.
Where production of made-to-measure products has already begun and those products are manufactured specifically according to the customer's choices and/or dimensions, costs already incurred and commitments entered into may be charged to the customer, where appropriate up to the full order amount, insofar as permitted by law.
12. Retention of title
Insofar as legally possible, all delivered materials and products remain the property of STUDIO STEEL BV until all amounts due have been paid in full.
Transfer of risk and retention of title are applied in accordance with current legal provisions.
13. Production, delivery and installation periods
All communicated production, delivery and installation periods are indicative, unless a binding deadline has been expressly agreed in writing.
The stated period starts only after:
1. technical measurement has been completed;
2. all necessary technical information and choices have been finalised;
3. the required technical drawings, where applicable, have been approved; and
4. all payments due at that time have been received.
Any delay caused by the customer's failure to provide information, choices, approvals or payments on time extends the planned period accordingly.
Except where mandatory legal provisions apply or a binding deadline has been expressly agreed in writing, delays do not automatically entitle the customer to compensation, a price reduction or termination of the agreement.
STUDIO STEEL BV cannot be held liable for delays caused by circumstances beyond its reasonable control, including supplier problems, material shortages, transport problems, weather conditions, strikes or other events of force majeure.
If a technical problem, damage or production defect occurs during production, delivery or installation, STUDIO STEEL BV is entitled to provide a suitable solution, repair or replacement within a reasonable period, taking the customer's statutory rights into account.
14. Warranty
Doors supplied and installation work carried out by STUDIO STEEL BV are covered by a 2-year warranty against manufacturing and installation defects, without prejudice to any mandatory statutory consumer warranty rights.
The warranty does not cover defects or damage resulting from, among other things:
• incorrect or abnormal use;
• normal wear and tear;
• inadequate maintenance;
• alterations made by the customer;
• work or modifications by third parties;
• incorrect measurements or information supplied by the customer;
• changes to floors, walls, ceilings or door openings after technical measurement;
• insufficient strength or stability of the existing structure;
• moisture, building or settlement problems not caused by STUDIO STEEL BV;
• external damage for which STUDIO STEEL BV is not responsible.
15. Force majeure
In the event of force majeure or circumstances reasonably beyond STUDIO STEEL BV's control, including fire, strikes, war, pandemics, material shortages, serious production problems, transport problems or government measures, STUDIO STEEL BV may temporarily suspend all or part of its obligations.
Performance periods are then extended by the duration of the force majeure and the period reasonably necessary to reorganise the work.
16. Complaints and opportunity to remedy
The customer must notify STUDIO STEEL BV in writing of any visible defects or damage as soon as possible after discovering them.
Where a complaint concerns a defect for which STUDIO STEEL BV is responsible, STUDIO STEEL BV must be given a reasonable opportunity and period to investigate the defect and, if necessary, repair it or offer an appropriate solution.
The customer may not have repairs carried out by third parties without prior consultation with STUDIO STEEL BV and then automatically recover those costs from STUDIO STEEL BV, unless applicable legislation provides otherwise.
17. Dimensional tolerances, glass, colour and material variations
All STUDIO STEEL BV products are manufactured wholly or partly to measure. The production process, materials used and technical requirements may result in limited tolerances and natural variations. Such variations are not regarded as defects insofar as they remain within customary technical and industry tolerances and do not impair the product's normal functionality.
17.1 Dimensional tolerances
Dimensions shown on technical drawings and production documents are manufacturing dimensions. Limited production and installation tolerances may occur in made-to-measure work.
Small deviations in dimensions, alignment, gaps, joints, profile positions, glazing divisions and connections to existing walls, floors or ceilings are inherent in made-to-measure work and cannot be regarded as defects where they are technically acceptable and do not prevent normal use of the product.
Existing floors, walls, ceilings and door openings are also not always perfectly flat, level, plumb or square. STUDIO STEEL BV cannot be held responsible for visual deviations resulting from such existing building irregularities.
17.2 Glass
Glass is an industrially manufactured product in which limited visual variations may be inherent in manufacturing and processing.
Small scratches, dots, air bubbles, inclusions, optical distortions, slight waviness, differences in reflection or other limited visual irregularities may occur and are assessed in accordance with applicable standards and customary glass industry tolerances.
Toughened and/or laminated safety glass may exhibit slight optical distortion, stress patterns or colour differences due to the production process. These characteristics do not in themselves constitute a defect.
Glass is assessed in normal daylight and under normal conditions of use, without aids and from a normal viewing distance. Irregularities visible only under particular lighting, backlighting, artificial light or from very close up are not automatically regarded as defects.
17.3 Colours and surface finish
Colours shown on screens, websites, photographs, printed materials, catalogues and other digital or printed examples are always indicative. The final colour may differ.
Limited differences in colour, gloss and texture compared with samples may also occur because of factors including the material, production batch, powder coating, painting process, light and substrate.
For orders produced at different times, STUDIO STEEL BV cannot guarantee a perfect colour match between different production batches.
Limited differences in colour, gloss level, texture or surface finish inherent in the material or production process are not regarded as defects.
17.4 Natural materials
Where natural materials such as wood are used, differences in colour, grain, pattern, knots and other natural characteristics are inherent in the material.
Wood may move slightly or change colour under the influence of temperature, humidity, sunlight and normal ageing. Such natural properties and changes are not regarded as manufacturing defects.
17.5 Functional assessment
A limited aesthetic or dimensional deviation does not entitle the customer to replacement, a price reduction, compensation or refusal of payment where the product functions correctly and the deviation falls within applicable standards and customary tolerances, without prejudice to the customer's mandatory statutory rights.
18. Applicable law and jurisdiction
Belgian law applies to all quotations, orders and agreements of STUDIO STEEL BV.
For professional customers, the courts of the judicial district of Antwerp have jurisdiction, subject to mandatory legal provisions.
For consumers, the statutory rules on territorial jurisdiction and consumer protection apply.
Last updated: